Removing and installing oil filter bracket - engine code letters AKE, AYM, BAU, BCZ, BFC — AUDI

🧭 Before you start

Fits: Audi A4 Cabriolet B6/B7 (8H), Audi A4 B6/B7 (8E)

• Renewed: gaskets

Don't miss

• Renew gaskets, seals and O-rings.

🔧 Engine codes this applies to

📋 Procedure

1. Remove starter catalytic converter: vehicles with front-wheel drive , vehicles with four-wheel drive .
2. Remove turbocharger .
3. Remove mechanical exhaust gas recirculation valve .
4. Loosen bolt (arrow) securing coolant pipe.
5. Remove bolt (2).

6. Detach oil pipe (1).
7. Remove bolts (arrows).
8. Move coolant pipe to side and remove oil filter bracket. [Note: Renew gaskets, seals and O-rings.]
9. Install turbocharger .
10. Install mechanical exhaust gas recirculation valve .
11. Install starter catalytic converter: vehicles with front-wheel drive , vehicles with four-wheel drive .

Other AUDI procedures

• Removing and installing poly V-belt for A/C compressor · 2 torque figures
• Removing and installing coolant pipe (front) – Audi TT Mk2
• Removing and installing fuel filter – Audi R8 · 1 torque figures
• Removing and installing glow plugs – Audi A8 D3 · 1 torque figures
• Checking charge pressure control solenoid valve N75 – Audi
• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures