Removing and installing lock carrier - vehicles up to model year 2014 — AUDI

🧭 Before you start

Fits: Audi A6/A7 C7 (4G, 2011–2018)

📋 Procedure

1. Remove noise insulation (front) .
2. Remove impact bar .
3. Remove radiator with radiator cowl 19Radiator/radiator fans; Removing and installing radiator.
4. Remove mounting for headlight Electrical system94Headlights; Removing and installing headlights.
5. Remove bolt (3).

6. Unplug electrical connectors (1 and 2).
7. Unplug electrical connector at crash sensor for front airbag (observe safety precautions General body repairs, interior00Safety precautions; Safety precautions when working on pyrotechnic components).
8. If fitted, unplug electrical connector (4) for secondary air pump motor V101.
9. Press release tabs and disconnect secondary air hoses (1) and (2).
10. Detach bonnet lock cable at coupling unit and move clear at lock carrier . [Note: Ignore (item 3).]
11. Remove bolts (5 and 6).
12. Have a second mechanic hold lock carrier (4) in position and unscrew bolts (1 ... 3).
13. Detach lock carrier with mountings for impact bar with help of second mechanic.
14. Press bumper cover mounting (front) (3) onto headlight housing (2)(arrow), hold in position and tighten bolt (1).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Cleaning evaporator with ultrasonic A/C cleanerVAS 6189 – Audi
• Removing and installing exhaust gas recirculation cooler (left-side)
• Checking exhaust flaps – Audi A8 D3 6.0
• Renewing oil seal for drive flange (right-side)
• Removing and installing mid-range loudspeaker, front left R103 · 1 torque figures