Removing and installing interior locking button for central locking system E308 / E309 — AUDI

🧭 Before you start

Fits: Audi A3 (8P, 2003–2012)

📋 Procedure

1. Switch off ignition and take out ignition key.
2. Remove door trim (front) 70.
3. Detach soundproofing mat from door trim in upper area.
4. Unplug electrical connector (1).
5. If fitted, pull door opener illumination bulb (2) out of bulb holder at door release.

6. Remove bolts (arrows).
7. Take interior door handle out of door trim.
8. Release retaining clips (arrows) and press central locking switch (1) out of door trim towards vehicle interior.
9. Press central locking switch into switch mounting until fasteners engage.
10. Install interior door handle 70.
11. Install door trim (front) 70.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing telephone operating electronics control unit, vehicles up to 06.2012
• Dismantling and assembling centre propshaft bearing, "“Dana”" propshaft
• Removing and installing propshaft flange
• Repairing ring terminals
• Removing and installing ATF cooler, 5-cylinder diesel engine