Removing and installing headlight main beam bulb M30/M32, halogen headlights - vehicles up to model year 2012 — AUDI

🧭 Before you start

Fits: Audi A4 B8 (8K, 2007–2015)

Don't miss

• Insert new bulb in housing; do not touch glass part of bulb with bare hands.

📋 Procedure

1. Switch off ignition and take out ignition key.
2. Turn light switch to position "“0”".
3. Remove headlight housing .
4. Detach cover (1) for main beam from headlight housing (arrow A).
5. Remove bulb (3) from spring clips (arrows B).

6. Unplug electrical connector (2) at bulb.
7. Insert new bulb in housing; do not touch glass part of bulb with bare hands.
8. Position bulb at lower spring clip.
9. Push bulb beyond resistance of upper spring clips into housing.
10. Plug in connector and close housing cover.
11. Install headlight housing .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Exploded view of wheel bearing housing, wheel bearing unit, trailing arm with mounting bracket, stone deflector
• Removing and installing subwoofer in rear shelf R157, high-voltage vehicles
• Exploded view - brake servo / brake master cylinder (all vehicles except TT RS)
• Removing and installing earth cable with battery monitor control unit J367 of battery A - vehicles with high-voltage system
• Removing and installing fuse holder A SA in luggage compartment - vehicles with high-voltage system