Removing and installing front turn signal bulb M5/M7 - gas discharge headlights with LED daytime running lights — AUDI

🧭 Before you start

Fits: Audi TT Mk2 (8J, 2006–2014)

Don't miss

• Insert new bulb in housing; do not touch glass part of bulb with bare hands.

📋 Procedure

1. Switch off ignition and take out ignition key.
2. Turn light switch to position "“0”".
3. On vehicles with TDI engine, remove air cleaner housing 23Air cleaner; Exploded view - air cleaner housing.
4. On vehicles with petrol engine, lift activated charcoal filter out of bracket (arrow) and place it aside with hoses still attached.
5. On vehicles with TDI engine, remove fuel filter and place to one side (with fuel hoses still connected) Fuel supply system, diesel engines20Fuel filter; Removing and installing fuel filter.

6. Detach cover (2) for turn signal from headlight housing (arrow A).
7. Turn bulb holder (1) anti-clockwise (arrow B) and pull it out of headlight housing.
8. Screw bulb out of bulb holder.
9. Insert new bulb in housing; do not touch glass part of bulb with bare hands.
10. Secure bulb holder by turning clockwise.
11. Close housing cover.
12. On vehicles with TDI engine, install air cleaner housing 23Air cleaner; Exploded view - air cleaner housing.
13. On vehicles with TDI engine, install fuel filter Fuel supply system, diesel engines20Fuel filter; Removing and installing fuel filter.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Renewing oil seal for bevel box output flange – Audi TT Mk2 · 1 torque figures
• Assembly sequence - removing and installing valve body
• Removing and installing camshafts and camshaft adjuster - cylinder head (left-side)
• Exploded view of crankshaft · 4 torque figures
• Removing and installing top part of sump – Audi A8 D2 3.3 TDI · 2 torque figures