Removing and installing front seat without longitudinal adjustment — AUDI

🧭 Before you start

Fits: platform codes 2EA, 2ED, 2EH, 2EX, 2EB, 2EE, 2EK, 2FC, 2FF, 2FL, 2FZ, 2FG, 2FM

📋 Procedure

1. ⚠ Refer to safety precautions when working on airbag . — Remove bolts (1) and (2) on left and right of seat trim.
2. Unclip retaining clips on inner side (arrows).
3. Pull seat trims backwards in direction of (arrow).
4. Remove front right belt fitting (3) from seat frame .
5. Remove bolts (1) and (2) on left and right.

6. Remove seat from vehicle.
7. Position seat on seat box in vehicle.
8. Start bolts (1) and (2) on left and right.
9. Install belt fitting (3).
10. Engage retaining clips on inner side of seat trims (arrows) and tighten bolts (1) and (2).
11. Connect electrical wiring connectors (if fitted) under seat.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing air intake grille (left-side) - vehicles from model year 2013 onwards
• Removing and installing pump motor – Audi TT Mk2 · 1 torque figures
• Removing and installing A-pillar trim (bottom), Roadster
• Checking fuel system pressurisation pump G6 (front-wheel drive)
• Exploded view - flywheel · 1 torque figures