Removing and installing door window, fixed door window: Audi A8 D4

🧭 Before you start

Fits: Audi A8 D4 (4H, 2010–2017)

📋 Procedure

1. Remove window frame .
2. Set down the window frame together with the door window on a suitable surface.
3. Remove bolts (7).
4. Detach retaining parts (8) and (10).
5. Pull door window (9) downwards out of window frame (1). [Note: Cover the painted surfaces on the window frame and both sides of the door window in the area around the lifting strap to prevent damage. The inside of the door window is extremely prone to scratching. It must not be scratched or damaged.]

6. Slide door window upwards into guides at window frame (1).
7. Install retaining parts (8) and (10).
8. Adjust the door window using the nut (5).
9. Counter with the nut (5).
10. Install the window frame .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Renewing sealing flange (pulley end) with crankshaft oil seal
• Removing and installing high-pressure pump - vehicles up to 09.2005
• Removing and installing coolant pipes (at side) – Audi 2.0
• Removing and installing engine oil cooler on lock carrier
• Removing and installing side airbag (front) with airbag igniter