Removing and installing CD changer: Audi A6/A7 C7

🧭 Before you start

Fits: Audi A6/A7 C7 (4G, 2011–2018)

Don't miss

• Insert two radio release tools T10057 into slots on CD changer R41(1) until they engage. Pointed ends of grips must face outwards.

📋 Procedure

1. Open glove box.
2. Take out any CD that is still in CD changer R41.
3. Switch off ignition and all electrical equipment and remove ignition key.
4. Insert two radio release tools T10057 into slots on CD changer R41(1) until they engage. Pointed ends of grips must face outwards.
5. Pull CD changer R41 out of mounting frame.

6. Release and unplug all connectors on CD changer R41.
7. Fit protective cap for cable connectorVAS 6223/9(1) onto MOST bus connector (2).
8. Press release tabs on CD changer R41 and remove radio release tools T10057.
9. Installation is carried out in reverse sequence; note the following:
10. Plug all connectors in.
11. Slide CD changer R41 into mounting frame until it engages.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures