Removing and installing bulb carrier: Audi A4 B5

🧭 Before you start

Fits: Audi A4 B5 (8D)

📋 Procedure

1. Switch off ignition and take out ignition key.
2. Turn light switch to position "“0”".
3. Remove cover on luggage compartment side trim.
4. Remove bolts (arrows) (if fitted).
5. Detach retaining frame (1) for CD changer (navigation system).

6. Lay aside retaining frame with connected wiring.
7. Detach retaining strap for central locking pump.
8. Lay aside central locking pump with wiring/hoses connected.
9. Unclip retaining clip and detach insulation (2).
10. Unplug electrical connector (1).
11. Compress catches (arrows) and remove bulb carrier (2) from rear light towards passenger compartment.
12. Detach bulbs from bulb holders.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Renewing twin-lip oil seal in input pinion – Audi
• Removing and installing connector point in electronics box (plenum chamber)
• Removing and installing intake manifold - engine codes AEB, AJL
• Checking axial clearance of camshafts – Audi A4 B5 · 1 torque figures
• Renewing inlet camshaft oil seal – Audi A6 C5