Removing and installing aerial amplifier for mobile telephone R86 - from model year 2015 onwards — AUDI

🧭 Before you start

Fits: Audi A6/A7 C7 (4G, 2011–2018); platform code 4X

📋 Procedure

1. Switch off ignition and all electrical equipment and remove ignition key.
2. Remove luggage compartment side trim (left-side) General body repairs, interior70Luggage compartment trim panels; Removing and installing luggage compartment side trim.
3. If fitted, remove lever for towing bracket General body repairs, exterior66Towing bracket; Exploded view - towing bracket.
4. Remove nuts (4, 6 and 7) and bolt (2) from bracket (1).
5. Remove brace (3).

6. Pivot digital sound package control unit J525(5) together with bracket (1) into luggage compartment.
7. If fitted, unplug connectors on TV tuner R78.
8. Fit protective cap for cable connectorVAS 6223/9(1) onto MOST bus connector (2).
9. Release and unplug connectors (2) on aerial amplifier for mobile telephone R86(1).
10. Press lugs (arrows) and pull aerial amplifier for mobile telephone R86(1) out of bracket.
11. Install in reverse sequence of removal.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing timing chain – Audi 1.2 CBZA/CBZB
• Test table for gearbox with hydraulic control E18/2
• Removing and installing lock carrier with attachments – Audi · 3 torque figures
• Removing and installing engine mounting (left-side) – Audi
• Removing gearbox on vehicles with 2.7 ltr. TDI engine – Audi