Installing repair kit for headlight housing — AUDI

🧭 Before you start

Fits: platform codes 2EA, 2ED, 2EH, 2EX, 2EB, 2EE, 2EK, 2FC, 2FF, 2FL, 2FZ, 2FG, 2FM

Don't miss

• If the shut lines/gaps around the headlight are uneven, the installation position must be adjusted.

📋 Procedure

1. Remove headlight
2. Roughly remove all excess material of broken headlight retaining tab using a suitable tool (arrow) (e.g. side cutters).
3. File (1) socket of headlight retaining tab (arrow) down flat at breakage point.
4. Fit new headlight retaining tab (1) in (direction of arrow) into mounting on headlight.
5. Screw securing bolt (arrow) into new headlight retaining tab.

6. Install headlight .
7. Check installation position so that shut lines/gaps between headlight and body are even.
8. If the shut lines/gaps around the headlight are uneven, the installation position must be adjusted.
9. Check functions of headlight.
10. Checking and, if necessary, adjusting headlight setting .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Testing injection quantity, absence of leaks and spray pattern of injectors
• Testing data exchange between engine control unit, ABS control unit and gearbox control unit
• Testing Motronic current supply relay -J271 – Audi 1.8
• Checking lambda probe heating -Z29 for lambda probe downstream of catalytic converter
• Remove cylinder head - Engine codes AEB, AJL – Audi 1.8