1.8 ltr. engine with automatic gearbox — AUDI

🧭 Before you start

Fits: Audi TT Mk1 (8N)

Don't miss

• Disregard (item 1).

📋 Procedure

1. Move selector lever to "“P”".
2. Switch off ignition and take out ignition key.
3. Release fasteners (1, 2, 3) and remove centre noise insulation panel.
4. Unplug electrical connectors (2) and (3).
5. Remove bottom starter bolt (1).

6. Remove cover (2) in front of intake manifold (bottom arrows). [Note: Disregard (item 1).]
7. Remove battery .
8. Unscrew bolt (arrow).
9. Carefully pull front battery cover (1) upwards out of guide.
10. Unclip main fuse box from top of battery tray (arrow).
11. Unscrew bolts (1) and (2) and detach rear battery cover from battery tray.
12. Remove battery tray (arrows).
13. Unplug electrical connector (3).
14. Unscrew wire for terminal 30 (item 2) from starter.
15. Unscrew wiring guide (1).
16. Disconnect wiring guide from centre hex stud.
17. Remove top starter bolt (1).
18. Lift out starter.
19. Install battery tray.
20. Install battery .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Dismantling and assembling seat pan (seat with electric adjustment)
• Removing and installing desiccant bag/desiccant cartridge (Modine condenser), vehicles with 4-cyl. or 6-cyl. engine
• Draining fuel tank (four-wheel drive, USA vehicles) – Audi
• Checking fuel pump delivery rate - TFSI engine – Audi A3
• Removing and installing tandem pump - vehicles with 4-valve engine