AUDI CCAA — 3L Engine
3L · 299 hp
Engine overview
Vehicles with this engine
Engine codes in the same family
The same code prefix usually means the same block with a different output, fuel or model year. Procedures are often shared — check the code on the engine plate.
Workshop procedures for this engine
Step-by-step procedures from the workshop database, carrying 129 torque figures.
- Removing timing chains from camshafts · 28 torque figures
- Removing and installing camshaft timing chains · 24 torque figures
- Exploded view - cylinder head · 22 torque figures
- Exploded view - crankshaft · 13 torque figures
- Removing and installing timing chain cover (bottom) · 7 torque figures
- Removing and installing drive chain for auxiliary drives · 7 torque figures
- Exploded view - timing chain covers · 7 torque figures
- Removing and installing cylinder heads · 2 torque figures
- Aligning tailpipes · 7 torque figures
- 6-cylinder direct injection engine with supercharger (3.0 ltr. 4-valve TFSI), mechanics — Removing engine · 1 torque figures
- 6-cylinder direct injection engine with supercharger (3.0 ltr. 4-valve TFSI), mechanics — Installing engine · 2 torque figures
- Removing and installing balance shaft · 3 torque figures
- Removing and installing engine mounting (left-side)
- Removing and installing engine mounting (right-side)
- Removing and installing front exhaust pipe (left-side) with catalytic converter
- 6-cylinder direct injection engine with supercharger (3.0 ltr. 4-valve TFSI), mechanics — Separating engine from automatic gearbox 09L · 1 torque figures
- Removing and installing front exhaust pipe (right-side) with catalytic converter
- Removing and installing timing chain covers (left and right)
- Securing supercharger to engine and gearbox support for assembly work · 3 torque figures
- Checking fuel pump delivery rate - vehicles with 6-cylinder engine
- Removing and installing supercharger
- Removing and installing intake manifold (bottom section) with fuel rail · 1 torque figures
- Removing and installing high-pressure pipe · 1 torque figures
- Removing and installing fuel pump control unit J538 - vehicles with FSI engine from 06.2004 onwards
- Checking fuel system diagnostic pump V144 - vehicles with 8-cylinder MPI engine
Got a CCAA problem? Ask for free.
Describe the symptoms — TorqFix replies with a diagnosis cited from verified workshop data.
Get free diagnosis →Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 2 Oct 2026.