AUDI CABD — 1.8L Engine
1.8L · 170 hp
Engine overview
Vehicles with this engine
Torque figures by job
From the step-by-step procedures for this engine — each figure sits in the step that uses it.
- 5 Nm (3.7 lb-ft) — Then initially tighten securing bolts alternately to
- 11 Nm (8.1 lb-ft) — Tighten bolts for crankcase breather system in the sequence (1
- 40 Nm (30 lb-ft) — Tighten with torque wrench initially to
- 8 Nm (5.9 lb-ft) — Pre-tighten bolts (arrows) to
- 9 Nm (6.6 lb-ft) — Tighten bolts to
- 8 Nm (5.9 lb-ft) — 1
- 4 Nm (3.0 lb-ft) — 1
- 40 Nm (30 lb-ft) — Tighten with torque wrench initially to
- 8 Nm (5.9 lb-ft) — Pre-tighten bolts (arrows) to
- 8 Nm (5.9 lb-ft) — Tighten bolts to
- 15 Nm (11 lb-ft) — 1
- 9 Nm (6.6 lb-ft) — Tighten bolts in the sequence (1
- 9 Nm (6.6 lb-ft) — 2
- 4 Nm (3.0 lb-ft) + 45° — 2
- 65 Nm (48 lb-ft) — Initially tighten bolts (1
- 20 Nm (15 lb-ft) — Initially tighten bolts (arrows A) to
- 5 Nm (3.7 lb-ft) — 1
- 12 Nm (8.9 lb-ft) — 2
- 16 Nm (12 lb-ft) — 3
- 25 Nm (18 lb-ft) — 4
- 8 Nm (5.9 lb-ft) — Tighten to
- 40 Nm (30 lb-ft) — Tighten to
- 10 Nm (7.4 lb-ft) — Tighten with torque wrench initially to
- 25 Nm (18 lb-ft) — Tighten with torque wrench to
Factory specifications
Values from the manufacturer documentation for this engine.
Emissions
| Emission code | 70/220*2006/96B |
| Emission standard | Euro 4 |
| CO2 average | 174 g/km |
| CO | 0.400 g/km |
| HC | 0.044 g/km |
| NOx | 0.012 g/km |
| CO2 average | 169 g/km |
| CO | 0.326 g/km |
| HC | 0.018 g/km |
| NOx | 0.020 g/km |
Engine codes in the same family
The same code prefix usually means the same block with a different output, fuel or model year. Procedures are often shared — check the code on the engine plate.
Workshop procedures for this engine
Step-by-step procedures from the workshop database, carrying 127 torque figures.
- Removing and installing camshaft timing chain · 29 torque figures
- Exploded view - sump/oil pump · 22 torque figures
- Securing engine to engine and gearbox support · 18 torque figures
- Exploded view - timing chain cover · 18 torque figures
- Removing and installing sealing flange (gearbox end) · 13 torque figures
- Exploded view - crankshaft · 13 torque figures
- Renewing vacuum unit for turbocharger · 4 torque figures
- Removing and installing cylinder head (1.8 ltr. engine)
- Removing and installing cylinder head (2.0 ltr. engine with assembly clearance feature)
- Removing and installing camshaft (1.8 ltr. engine)
- Removing and installing camshaft (2.0 ltr. engine)
- A4_8K/A5_8T_1.8 TFSi_Generation II_Timing Chain
- Exploded view - cylinder block (gearbox end) · 5 torque figures
- Checking valve timing · 2 torque figures
- Checking fuel pressure sender G247 · 3 torque figures
- Adjusting vacuum unit for turbocharger
- Checking fuel system pressurisation pump G6 - A5/S5/RS 5 up to model year 2011, A4 up to model year 2012
- Removing and installing valve stem oil seals (cylinder head installed)
- Removing and installing valve stem oil seals (cylinder head removed)
- Removing and installing fuel delivery unit - A5 up to model year 2011, A4 up to model year 2012, rest-of-world vehicles with four-wheel drive, USA vehicles with front-wheel drive/four-wheel drive
- Removing and installing engine mountings
- Removing and installing fuel delivery unit - A5 up to model year 2011, A4 up to model year 2012, rest-of-world vehicles with front-wheel drive
- Renewing timing chain cover (bottom)
- Removing and installing fuel tank with attached components - rest-of-world vehicles with four-wheel drive
- Removing and installing fuel tank with attached components - rest-of-world vehicles with front-wheel drive
Got a CABD problem? Ask for free.
Describe the symptoms — TorqFix replies with a diagnosis cited from verified workshop data.
Get free diagnosis →Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 22 Aug 2026.