Separating seat pan cover from seat pan padding — VW

🧭 Before you start

Fits: platform codes A32, A33

Don't miss

• Ensure that seat cover (1) is free of creases.

📋 Procedure

1. Remove cover and padding .
2. Unclip beading strips (2) from locking lugs (5).
3. Detach seat cover from tabs (4) on both sides using front-end hook3370.
4. Remove carrier (3) with seat padding and seat depth adjustment from seat cover (1).
5. Pull retaining tab (3) of seat cover (1) in (direction of arrow) off seat padding (2).

6. Pull seat cover (1) off seat padding (2).
7. Cut through upholstery clips (3) using pliers (4).
8. Pull seat cover (1) over padding (4).
9. Secure seat cover (1) with upholstery clips (2) in mountings (3).
10. Use upholstery clip pliersV.A.G 1634 for this.
11. Ensure that seat cover (1) is free of creases.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing cover for centre console · 4 torque figures
• Removing and installing mounting bracket – VW 2.0 · 1 torque figures
• Separating engine and gearbox · 1 torque figures
• Removing and installing backrest adjustment motor · 2 torque figures
• Removing and installing convenience system central control unit J393 · 4 torque figures