Removing front bumper cover, Polo Blue Motion — VW

🧭 Before you start

Fits: VW Polo 6R (2009–2014)

📋 Procedure

1. Remove headlights Vehicle electrics; Electrical system94Lights, bulbs, switches - exterior.
2. Remove bolts (2).
3. Remove bolts (3) (pointing upwards) on left and right of wheel housing.
4. Unscrew bolts (4) from wheel housing.
5. Unscrew bolts (4) and (5) from below. [Note: Further dismantling requires the help of a second mechanic.Notes and procedures for parking aid are located in Electrical system94Lights, bulbs, switches - exterior; Parking aid system.]

6. Pull front bumper cover (1) out of fasteners of guides on left and right of wing (arrows c).
7. Release fasteners on guides (arrows b) and radiator grille (arrows a).
8. Release fasteners (3) from lock carrier (4), located behind radiator grille.
9. With the aid of a second mechanic, pull front bumper cover (1) parallel (arrows d) off vehicle.
10. Disconnect connectors from all existing electrical components.
11. Disconnect washer fluid hose connectors (if fitted) Electrical system92Headlight washer system.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Renewing seals on left (between bevel box and gearbox) – VW
• Removing and installing entry and start authorisation control unit J518, left-hand drive
• Removing and installing park assist steering control unit J791, left-hand drive · 1 torque figures
• Removing and installing rear section of reducing agent supply line, Sharan
• Removing and installing exhaust gas temperature sender 2G448, CC