Removing ATF cooler: VW Sharan I / SEAT Alhambra

🧭 Before you start

Fits: VW Sharan I / SEAT Alhambra (7M)

Don't miss

• Unbolt coolant expansion tank and place to side. Do not open cooling system.

📋 Procedure

1. First check whether a coded radio is fitted. In this case, obtain anti-theft code.
2. Move selector lever to "“P”" position.
3. With the ignition switched off, disconnect the battery earth strap.
4. Remove trim (1) for air duct (arrows).
5. Remove trim (2) for battery.

6. Pull connector off coolant expansion tank.
7. Unbolt coolant expansion tank and place to side. Do not open cooling system.
8. Remove battery and battery tray Electrical system27Battery; Removing and installing battery.
9. Tie up coolant tank, e.g. with wire.
10. Pull cable duct and cables forwards.
11. Clamp-off ATF cooler hoses with hose clamps 3094 and detach at ATF cooler.
12. Remove ATF cooler (1) from gearbox (arrow A).

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Pistons and bearing rods - disassemble and assemble
• Removing and installing three-phase current drive VX54
• Removing and installing hybrid battery unit AX1
• Separating electric drive motor V141 and engine
• Removing and installing ABS control unit J104 and ABS hydraulic unit N55