Removing and installing water radiator for charge air cooling circuit, Sharan — VW

🧭 Before you start

Fits: VW Tiguan I (5N, 2007–2016), VW CC (358, 2012–2017), VW Sharan II / SEAT Alhambra (7N, 2010–)

• Opens: coolant
• Renewed: o-rings

Don't miss

• If there are minor dents in the fins, refer to .

🔧 Engine codes this applies to

📋 Procedure

1. Drain coolant .
2. Remove radiator cowl .
3. Remove radiator (2).
4. Remove coolant hoses (3) and (4) on charge air cooler (1).
5. To do this, release retaining clips.

6. Lift charge air cooler (1) out of rubber mountings (arrows).
7. Insert charge air cooler (1) into rubber mountings (arrows). While doing this, note sealing strip between charge air cooler and condenser.
8. Installing radiator . [Note: If there are minor dents in the fins, refer to .]
9. Renew O-rings after removal.
10. Replenish coolant .

Other VW procedures

• Removing and installing exhaust gas recirculation control motor 2V339
• Removing and installing radiator cowl with radiator fan, CC
• Filling, bleeding fuel system – VW Touareg II
• Testing jammed-open injectors
• Removing and installing injector for reducing agent N474 – VW
• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures