Removing and installing seat height adjustment, standard seat, seat of type "ergo Aktiv" — VW

🧭 Before you start

Fits: VW Golf VII Variant (BA), VW Golf VII (5G, 2012–2020); platform code BE1

Don't miss

• Bolts (1) and bolt (3) are of different lengths.Bolt (3) is shorter.The head of bolt (3) is larger.Ensure proper allocation.

📋 Procedure

1. Adjust seat to fully upright position.
2. Remove backrest adjuster .
3. Remove handle for seat height adjustment .
4. Remove seat trim on sill side .
5. Remove bolts (2).

6. Remove lever (1).
7. Remove lock washer (1).
8. Remove bolts (1) and (3)
9. Remove seat height adjuster (2). [Note: Bolts (1) and bolt (3) are of different lengths.Bolt (3) is shorter.The head of bolt (3) is larger.Ensure proper allocation.]
10. Push down seat via backrest.
11. Fit seat height adjustment (2).
12. Tighten bolts (1) and (3)

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing natural gas tank – VW CPWA
• Removing cover for gearbox housing and 5th/6th gear
• Installing cover for gearbox housing and 5th/6th gear
• Renewing rear roof reinforcement
• Removing and installing final drive, up to model year 2010