Removing and installing seat cover and seat cushion for "“1/3”" bench seat (5-seater) — VW

🧭 Before you start

Fits: VW CC (358, 2012–2017)

📋 Procedure

1. Remove left backrest segment
2. Press button of head restraint guide and pull both head restraint out of backrest.
3. On both sides of cover (1), press retainer inwards (arrow A) using a screwdriver and pull cover upwards out of backrest.
4. Remove hole fitting (2) on right.
5. Using a screwdriver (arrow), lever out clamping bar (1) from mountings in backrest frame.

6. Lever out remaining clamping profiles around circumference, as described, from mountings in backrest frame.
7. Fold up cover (3) on sides and push padding (4) and cover (3) over head restraint guides.
8. Using a small screwdriver, lever side webs out of fasteners (1) and pull out clamping strips (2).
9. Detach cover (3) and padding (4) from seat frame (5).
10. Install in reverse order of removal.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures