Removing and installing reflector, vehicles ▸ 05.00: VW Sharan I / SEAT Alhambra

🧭 Before you start

Fits: VW Sharan I / SEAT Alhambra (7M)

Don't miss

• Do not touch reflector with bare hands. Always use a clean clove or fabric gloves when removing and installing.

📋 Procedure

1. Remove turn signal .
2. Remove radiator grille General body repairs, exterior66Exterior equipment; Trims; Removing and installing radiator grille with trim frame.
3. Remove headlight lens glass . [Note: Do not touch reflector with bare hands. Always use a clean clove or fabric gloves when removing and installing.]
4. Unclip reflector from inner adjustment spindle (arrow A).
5. Push reflector outwards slightly and unclip reflector from outer adjustment spindle (arrow B).

6. Remove headlight bulbs .
7. Install headlight bulbs .
8. Clip reflector into adjustment spindles.
9. Remainder of installation is carried out in the reverse sequence.
10. Check headlight settings 10.1.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Servicing 3-sectionpropshaft
• Dismantling and assembling heater unit -B2L-
• Dismantling and assembling differential for vehicles with engines up to 103 kW
• Renewing seal for output flange on bevel box
• Installing gearbox, vehicles with all-wheel drive as of model year 2010