Removing and installing radiator cowl with radiator fan, CC — VW

🧭 Before you start

Fits: VW Tiguan I (5N, 2007–2016), VW CC (358, 2012–2017), VW Sharan II / SEAT Alhambra (7N, 2010–)

🔧 Engine codes this applies to

📋 Procedure

1. Remove engine cover panel .
2. Release cover (1) at catches (arrows), and remove it.
3. Remove coolant hose (2) from retainers (3).
4. Release catches (arrows), and detach air duct from mounting (1).
5. Unscrew bolts (arrows) from lock carrier and remove the air duct.

6. Remove air filter housing Removing and installing air filter housing.
7. Remove noise insulation General body repairs, exterior66Noise insulation; Assembly overview - noise insulation.
8. Release and pull off connector (1).
9. Unclip connector from retainer.
10. Remove bolts (arrows).
11. Open retainer for coolant hose on radiator cowl.
12. Detach coolant hose from retainer.
13. Remove cowling together with radiator fans upwards.

Other VW procedures

• Aligning exhaust system free of tension, Sharan · 1 torque figures
• Removing and installing exhaust gas recirculation control motor V338
• Emptying tank for reducing agent, Sharan
• Removing and installing exhaust gas temperature sender 2G448, Sharan and Tiguan
• Checking delivery pressure and quantity for fuel system pressurisation pump G6
• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures