Removing and installing cowling with radiator fan V7 and radiator fan 2V177 — VW

🧭 Before you start

Fits: VW Jetta VI (16, 2010–2018), VW Golf V / Jetta (1K, 2003–2009); platform code AJ5

🔧 Engine codes this applies to

📋 Procedure

1. Remove engine cover panel .
2. Open air intake cover by carefully releasing detents (arrows).
3. Unscrew securing bolts (arrows) for air intake (1) and remove connecting hose (2) from guide.
4. Unscrew upper securing bolts (top arrows) of air duct box.
5. Remove noise insulation General body repairs, exterior50Body - front; Assembly overview - noise insulation

6. Disconnect connector (1) and expose lines.
7. Remove connecting hose for charge air cooling »hot side«.
8. Remove connecting hose for charge air cooling »cold side«.
9. Remove securing bolts (bottom arrows).
10. Remove cowling together with radiator fans downwards.
11. Unscrew securing nuts (arrows) and remove radiator fan.

Other VW procedures

• Removing and installing oil pump with balance shaft gear assembly · 2 torque figures
• Removing and installing coolant thermostat housing with thermostat · 2 torque figures
• Removing and installing radiator fan V7 and radiator fan 2V177
• Removing and installing ignition coils with output stage · 1 torque figures
• Removing and installing engine control unit with theft protection
• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures