TorqFix

Removing and installing oil spray jets: VW Jetta VI (BLG, BMY, BWK, CAVA, …)

Step-by-step removing and installing oil spray jets for the VW Jetta VI: 11 steps. What to remove, in what order, and what to check after.

Workshop procedure for VW — the exact step sequence and torque figures, straight from real workshop data.

11 steps 40 engine codes engine codes merged from 40 documented variants

🧭 Before you start

Fits: VW Jetta VI (16, 2010–2018); platform codes AV2, AV3, AY3

Don't miss

  • Risk of damage to oil spray jets.Do not bend oil spray jets.After reinstalling pistons, ensure that they have sufficient clearance to oil spray jets.Bent oil spray jets must be renewed. — Install oil pump .

🔧 Engine codes this applies to

BLGBMYBWKCAVACAVBCAVCCAVDCAVECAXACBZACBZBCBZCCCZBCDGACHHACHHBCHPACHZBCHZCCHZDCJSACJSBCJSCCJXACJZACJZBCJZCCJZDCKMACMBACMSBCNLACNTACPTACPVACPVBCPWACRJACRUACTHA

📐 38 workshop diagrams for BLG

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

Removing and installing oil spray jets — BLG · diagram 1
Removing and installing oil spray jets — BLG · diagram 2
Removing and installing oil spray jets — BLG · diagram 3
Removing and installing oil spray jets — BLG · diagram 4
Removing and installing oil spray jets — BLG · diagram 5
Removing and installing oil spray jets — BLG · diagram 6
Removing and installing oil spray jets — BLG · diagram 7
Removing and installing oil spray jets — BLG · diagram 8
+ 30 more diagrams
🔒 38 workshop diagrams for this job Ask about your VW BLG — free or sign up free to see the drawings

📋 Procedure

  1. Remove noise insulation General body repairs, exterior50Noise insulation; Assembly overview – noise insulation, petrol engine.
  2. Remove front right wheel housing liner 66.
  3. Remove sump .
  4. Remove oil pump . [Note: The crank web of the respective cylinder must be positioned so that the socket T10545 can be inserted in the pressure relief valve as close to vertical as possible.Furthermore, the points of the socket T10545 and of the pressure relief valve must engage well.]
  5. Turn crankshaft via vibration damper securing bolt in direction of engine rotation until the respective bolt is accessible.
BLG? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Unscrew pressure relief valve (1) using hexagon bit T10545.
  2. Remove oil spray jets (2).
  3. ⚠ Risk of damage to oil spray jets.Do not bend oil spray jets.After reinstalling pistons, ensure that they have sufficient clearance to oil spray jets.Bent oil spray jets must be renewed. — Install oil pump .
  4. Install sump .
  5. Install front right wheel housing liner 66.
  6. Install noise insulation General body repairs, exterior50Noise insulation; Assembly overview – noise insulation, petrol engine.
Workshop diagrams

Ask TorqFix about your VW BLG — it answers with the exact sequence for that engine and the workshop drawing for each step. First question is free after a 20-second sign-up, no card.

Ask about your VW BLG — free → or sign up free to see the drawings

Other VW procedures

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.