Removing and installing Immediate charge button E766 — VW
Removing and installing Immediate charge button E766 on VW: 10 steps. What to remove, in what order, and what to check after.
Workshop procedure for VW — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform code BE1
📋 Procedure
- De-energise high-voltage system .
- Remove rear right wheel.
- Remove rear right wheel housing liner General body repairs, exterior66Wheel housing liner; Assembly overview - rear wheel housing liner.
- Detach connector (1) from bracket (2).
- Release connector (1) and disconnect.
- Remove tank flap unit General body repairs, exterior55Tank flap unit; Assembly overview - tank flap unit.
- Unscrew bolts for charging socket so that the connector of immediate charge button E766 can be pulled out.
- Remove bolts (2).
- Remove immediate charge button E766(1).
- Commission high-voltage system .
Other VW procedures
- Removing engine · 41 torque figures
- Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
- Adjusting valve timing – VW Passat B5 · 83 torque figures
- Removing and installing camshafts – VW Passat B6 · 39 torque figures
- Removing and installing coolant pump · 53 torque figures
- Assembly overview - power steering rack, model year 2010 ►
- Allocation gearbox - engine, gear ratio and capacities, rear-wheel drive
- Allocation gearbox - engine, gear ratio and capacities, four-wheel drive
- Removing and installing connecting pipes – VW 2.0 TDI CFCA
- Removing and installing exhaust gas recirculation cooler, “single turbo engine”
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.