Removing and installing headlight range control motor, vehicles ▸ 05.00 — VW

🧭 Before you start

Fits: VW Sharan I / SEAT Alhambra (7M)

📋 Procedure

1. Remove turn signal .
2. Remove radiator grille General body repairs, exterior66Exterior equipment; Trims; Removing and installing radiator grille with trim frame.
3. Remove headlight bulbs .
4. Remove headlight lens glass .
5. Remove reflector .

6. Remove securing bolts (1).
7. Disconnect multi-pin connector for headlight.
8. Unclip connector (2) on headlight housing and press contacts 5, 6 and 7 out of connector.
9. Press contacts 5, 6 and 7 into connector and reconnect connector to headlight housing.
10. Remainder of installation is carried out in the reverse sequence.
11. Checking headlight settings 10.1

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Dismantling and assembling variable intake manifold · 1 torque figures
• Removing and installing valve of exhaust gas recirculation system · 1 torque figures
• Removing and installing anti-theft engine control unit J623 (vehicles ▸model year 2007)
• Removing and installing air filter, engine codes BMD, BBM, BZG · 1 torque figures
• Removing and installing anti-theft engine control unit (engine code BMT)