Removing and installing gear knob, Scirocco, Golf Cabriolet — VW
Removing and installing gear knob, Scirocco, Golf Cabriolet on VW: 10 steps. What to remove, in what order, and what to check after.
Workshop procedure for VW — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: VW Golf Cabriolet (517, 2011–2016), VW Tiguan I (5N, 2007–2016); platform code 137
📋 Procedure
- Carefully unclip gaiter (B) and frame from centre console, e.g. with removal wedge3409.
- Pull gaiter upwards, inside out over gear knob.
- Open clamp (arrow) and pull off gear knob together with gaiter.
- Then pull off, or carefully lever off, centre console frame (arrow 1).
- Pull off noise insulation (arrow 2).
- First insert noise insulation.
- Then push frame into centre console.
- Then turn gaiter inside out.
- Install gear knob and gaiter and squeeze new clamp (arrow) together.
- Then push gaiter into centre console frame.
Other VW procedures
- Removing engine · 41 torque figures
- Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
- Adjusting valve timing – VW Passat B5 · 83 torque figures
- Removing and installing camshafts – VW Passat B6 · 39 torque figures
- Removing and installing coolant pump · 53 torque figures
- Removing and installing parts of the secondary air system
- Notes for repair work on anti-locking brake system
- Assembly overview - wheel bearing
- Repairing Sanden SD6 V12 air conditioning system magnetic coupling N25
- Removing and installing parts of secondary air system
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.