Removing and installing fuse holder in front left footwell — VW

🧭 Before you start

Fits: platform codes 6V2, 6V5

Don't miss

• Fuse holder assignment .

📋 Procedure

1. Disconnect battery .
2. Remove screw (1) and take off cover (2).
3. Remove screws (arrows) from driver side storage compartment (3).
4. Take out driver side storage compartment (3).
5. Unscrew cross-head screws (arrows) and remove lower cover.

6. Remove bolts (arrows) for securing fuse holder.
7. Pull fuse holder (arrow) downwards slightly.
8. Press locking lugs (arrows) together and remove cover (1).
9. Take fuses out of fuse holder.
10. Pull locking slide (arrows) on the back of the fuse holder out of housing onto stop.
11. Pull wiring out of fuse holder. [Note: Fuse holder assignment .]
12. Connecting battery .

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Intake manifold, front exhaust pipe with catalytic converter and accessories.
• Removing and installing side-airbag crash sensor, driver side G179
• Removing and installing seat occupied recognition control unit J706
• Assembly overview – rear brake C 38
• Assembly overview - wheel bearing assembly