Removing and installing bracket for onboard supply control unit J519 — VW

🧭 Before you start

Fits: platform codes AU1, BX5

Don't miss

• Release and disconnect connector on front parking aid warning buzzer H22.

📋 Procedure

1. Disconnect batteryA.
2. Remove dash panel General body repairs, interior70Dash panel; Removing and installing dash panel.
3. Cut through cable tie (arrow).
4. Disengage fuse holder C and push to side .
5. Release and disconnect connector on front parking aid warning buzzer H22.

6. Release and disconnect connector on onboard supply control unit J519.
7. Release and disconnect connector on parking aid control unit J446/park assist steering control unit J791.
8. Release locking mechanism on bracket and press out bracket to remove diagnostics connector.
9. Unscrew bolts (2, 3) and (6).
10. Push bracket (1) forwards out of central tube until centring pins (4) and (5) are disengaged.
11. Cut through cable ties (arrows).
12. Move electrical wiring harness clear at mounting.
13. Take out bracket towards passenger compartment.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Checking charge air system for leaks
• Handbrake (drum brake) - adjust
• 4 - Speed automatic gearbox 001 — Reverse clutch -K2-: disassemble and assemble
• Differential: adjust · 1 torque figures
• Installing the cylinder head · 1 torque figures