Removing and installing bracket for fuse holder ASA: VW Polo 6R

🧭 Before you start

Fits: VW Polo 6R (2009–2014)

📋 Procedure

1. ⚠ To disconnect and reconnect the battery, the procedure described in the workshop manual should be strictly adhered to . — Disconnect batteryA.
2. Remove air filter housing 24Air filter; Removing and installing air filter housing.
3. Detach catches (1) and remove cover (2) of fuse holder ASA.
4. Release and disconnect connector (1).
5. Unscrew nut (2) and remove the line.

6. Lever off cover (3), undo nut beneath it and remove the line.
7. Undo nut (4).
8. Remove fuse holder ASA(1) from catch in direction of arrow (A).
9. Remove fuse holder ASA(1) in direction of arrow (B) from bracket.
10. Undo nuts (1).
11. Remove bolt (2).
12. Pull bracket for fuse holder ASA(1) upwards.
13. Release and disconnect connector (2).
14. Remove bracket for fuse holder ASA(1) from vehicle.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing centre console drink holder – VW · 1 torque figures
• Removing and installing rear storage compartment in centre console · 1 torque figures
• Removing and installing cover for instrument housing – VW · 1 torque figures
• Removing and installing supports – VW Touareg II · 1 torque figures
• Removing and installing drawer – VW Touareg II · 1 torque figures