Removing and installing air conditioner compressor, engine codes CASA, CASD, CATA, CJGD, CJMA, CRCA — VW

🧭 Before you start

Fits: VW Touareg II (7P, 2010–2018)

Don't miss

• When installing, make sure connector is correctly connected to air conditioner compressor.When installing, ensure dowel sleeves are located correctly between engine and AC compressor.

📋 Procedure

1. Observe safety precautions when working on the high-voltage system Safety precautions when working on high-voltage system.
2. Observe safety precautions when working in the vicinity of high-voltage components Safety precautions when working in the vicinity of high-voltage components.
3. Comply with notes Working on refrigerant circuit.
4. Extract refrigerant with air conditioning service station. Comply with notes .
5. Remove charge air hose 21.

6. Removing poly V-belt 13.
7. Removing and installing power assisted steering vane pump 48.
8. Separate connector on air conditioner compressor.
9. Separate refrigerant line from brackets (10) and (12).
10. Remove refrigerant lines from air conditioner compressor. [Note: When installing, make sure connector is correctly connected to air conditioner compressor.When installing, ensure dowel sleeves are located correctly between engine and AC compressor.]

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing number plate light X4/X5 with threaded connections · 1 torque figures
• Removing and installing (right-hand drive models) park assist steering control unit J791 · 1 torque figures
• Removing and installing backplate for drum brakes – VW
• Removing and installing handbrake lever trim – VW Jetta VI
• Removing and installing brake caliper piston; Rear brakes, CI 38