Installing gearbox - vehicles with 2.0 l - 103 kW TDI engine — VW

🧭 Before you start

Fits: VW Tiguan I (5N, 2007–2016)

Don't miss

• After installing, check ATF level .

📋 Procedure

1. Check for proper seating of both dowel sleeves between engine and gearbox.
2. Set gearbox in place, possible adjusting gearbox support.
3. Now install an engine/gearbox connecting bolt.
4. Fit and tighten all torque converter bolts. Torque specification .
5. Next bolt bracket (2) to gearbox. Torque specification .

6. Raise engine and gearbox, reestablish »former seating« of bolts (1) for gearbox mounting to bracket (2) and tighten. Torque specification .
7. Install bevel box .
8. Assemble exhaust system, taking particular care to follow the procedure when tightening particle filter 26Exhaust system.
9. Adjust selector lever cable .
10. Install air filter housing.
11. After installing, check ATF level .
12. Perform basic setting by pressing Perform basic setting.
13. Press →.
14. Press →.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing rear seat backrests – VW Touareg II · 3 torque figures
• Checking fuel system for leaks – VW Golf V / Jetta
• Removing and installing chain for balancer shaft and oil pump · 2 torque figures
• Removing and installing multifunction switch · 1 torque figures
• Installing dual clutch – VW Tiguan I 2.0