Dismantling and assembling seat pan, bucket seat — VW

🧭 Before you start

Fits: platform code 138

Don't miss

• The bolts (1) to (3) are microencapsulated and must be renewed each time they are loosened.Before new bolts are installed, the threads of the corresponding holes must be cleaned.

📋 Procedure

1. Attach seat repair standVAS 6136 to engine and gearbox supportVAS 6095.
2. Attach seat repair standVAS 6136 to engine and gearbox supportVAS 6095.
3. Remove front seat .
4. Secure front seat to seat repair standVAS 6136.
5. Remove seat trim on sill side .

6. Remove front belt buckle .
7. Remove seat trim on tunnel side .
8. Remove front backrest .
9. Remove backrest cover and cushion .
10. Remove bolts (1).
11. Remove bolt (2).
12. Remove bolt (3). [Note: The bolts (1) to (3) are microencapsulated and must be renewed each time they are loosened.Before new bolts are installed, the threads of the corresponding holes must be cleaned.]

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Checking camshaft timing control/adjustment – VW AYL/AZX
• Removing and installing poly V-belt pulley without freewheel · 5 torque figures
• Removing and installing E-box on left side of engine compartment (engine compartment E-box) · 3 torque figures
• Removing and installing fuel filter – VW Touran II · 3 torque figures
• Installing high-pressure lines · 3 torque figures