Converting H7 headlights for use when driving on the left to driving on the right, saloon, right-hand drive — VW

🧭 Before you start

Fits: platform codes 601, 602, 603, 604

📋 Procedure

1. Turn light switch to "“0”" position.
2. Clean headlight lens.
3. Remove protective film on back of assembly film (C) only in area (D) only.
4. Align application film (C) edges (B) to the trim lines (A) on the lens of the headlight.
5. Press (D) area firmly onto lens of the headlight.

6. Carefully pull assembly film (C) off the headlight lens.
7. The masking film (D) remains on the lens of the headlight.
8. Remove protective film on back of assembly film (C) only in area (D) only.
9. Align application film (C) edges (B) to the trim lines (A) on the lens of the headlight.
10. Press (D) area firmly onto lens of the headlight.
11. Carefully pull assembly film (C) off the headlight lens.
12. The masking film (D) remains on the lens of the headlight. [Note: Remove any remaining adhesive using alcohol-based or alcohol and water-based cleaning fluid. For example a cloth soaked with isopropyl alcohol.Customers should be informed of how to remove residual adhesive after detaching the masking section.]

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Servicing rear drive shaft
• Replacing injection pump throttle lever return spring – VW AAB
• Checking injectors for break-off pressure and for leakage
• Removing and installing air cooling parts
• Dismantling and assembling selector mechanism, gearbox side