Connecting battery on left in luggage compartment — VW
Connecting battery on left in luggage compartment on VW: 4 steps, 2 torque figures. What to remove, what to tighten and to how many Nm, what to check.
Workshop procedure for VW — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: VW Phaeton (3D)
🔩 Torque settings
Values can differ between engine variants — check the code stamped on your block.
| Torque | Fastener / step |
|---|---|
| 6 Nm (4.4 lb-ft) | Tighten securing bolt of battery negative terminal clamp |
| 9 Nm (6.6 lb-ft) | Tighten securing bolt of positive terminal clamp |
ℹ️ Always cross-check the exact figure against your vehicle's factory manual before final tightening — a wrong torque can damage the engine. These values are extracted from workshop data and may not cover every variant or revision.
📋 Procedure
- Connect positive terminal clamp (arrow) to battery positive terminal.
- Tighten securing bolt of positive terminal clamp to 9 Nm. — 9 Nm (6.6 lb-ft)
- Only after positive terminal clamp is secure may negative terminal clamp (arrow) be attached to battery negative terminal.
- Tighten securing bolt of battery negative terminal clamp to 6 Nm. — 6 Nm (4.4 lb-ft)
Other VW procedures
- Removing engine · 41 torque figures
- Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
- Adjusting valve timing – VW Passat B5 · 83 torque figures
- Removing and installing camshafts – VW Passat B6 · 39 torque figures
- Removing and installing coolant pump · 53 torque figures
- Removing and installing centre console with no armrest · 3 torque figures
- Removing and installing airbag unit on front passenger side · 2 torque figures
- Vehicles without belt anchor tensioner · 3 torque figures
- Removing and installing rear seat belts – VW Golf Cabriolet · 3 torque figures
- Removing and installing backrest shells – VW Golf Cabriolet · 3 torque figures
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.