Adjusting parking brake, TRW PC 38 HRA — VW

🧭 Before you start

Fits: platform codes A32, A33

Don't miss

• The handbrake cables (3) are tensioned using the quick adjuster (2).

📋 Procedure

1. Open cover of rear compartment in centre console.
2. Remove mat from storage compartment.
3. Release locking lugs (arrows) and open service flap (1).
4. Detach handbrake cables from handbrake lever .
5. Raise vehicle.

6. Depress brake pedal forcefully at least 3 times.
7. Attach handbrake cables .
8. Set parking brake once tightly.
9. Release parking brake.
10. Loosen adjustment screw (1) with socket Torx T10347. [Note: The handbrake cables (3) are tensioned using the quick adjuster (2).]
11. Tighten adjustment screw (1) with socket Torx T10347.
12. Set parking brake tightly and release 3 times.
13. Loosen and tighten adjustment screw (1) with socket Torx T10347.
14. Distance (a) between lever (1) and stop (2) on left and right brake calipers should be ≤ 1.5 mm in total.
15. Check that both wheels turn freely.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing cover and padding for squab with integrated child seat · 1 torque figures
• Removing and installing subframe with steering box – VW
• Dismantling and assembling drive shaft
• Adjusting the front camera for driver assistance system R242
• Removing and installing supports for driver-side deformation element · 2 torque figures