Abdominal belt with double latch (Saveiro "“double cab”") - remove and install — VW

🧭 Before you start

Fits: platform codes 5U4, 5U3, 5UA, 5UC, 5UB

• Renewed: self-locking nuts

Don't miss

• Always replace self-locking nuts and bolts subject to angular torqueAlways replace corroded bolts/nuts — Remove rear seat .

🔩 Torque settings

Values can differ between engine variants — check the code stamped on your block.

ℹ️ Always cross-check the exact figure against your vehicle's factory manual before final tightening — a wrong torque can damage the engine. These values are extracted from workshop data and may not cover every variant or revision.

📋 Procedure

1. ⚠ Always replace self-locking nuts and bolts subject to angular torqueAlways replace corroded bolts/nuts — Remove rear seat .
2. Remove the fastening screw (2) to remove the abdominal belt and double latch (1).
3. Remove the fastening screw (4) to remove the double latches (3).
4. Tighten fastening screw (2) and (4) with a torque of (40 Nm). — 40 Nm (30 lb-ft)

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures