TorqFix

XC90 Parking brake adjustment — VOLVO

XC90 Parking brake adjustment on Volvo: 16 steps, engines B5254T2, B5254T9, B6294T, B6324S. What to remove, in what order, and what to check after.

Workshop procedure for VOLVO — the exact step sequence and torque figures, straight from real workshop data.

16 steps 10 engine codes

🧭 Before you start

Fits: platform codes 2.4D, |, 2.5T, 3.2, D3, (2.4D), D5, T5, T6, V8

🔧 Engine codes this applies to

📋 Procedure

  1. Remove the interior trim
  2. Located at the centre console
  3. Left-hand side
  4. Parking brake adjustment mechanism:
  5. Remove the clip
B5254T2? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Turn the adjuster clockwise
  2. Press the socket back over the adjustment rod
  3. Turn the adjuster anti-clockwise
  4. Until the clip can be refitted
  5. Press the parking brake pedal
  6. 1 notch
  7. Adjusting the parking brake
  8. Use the special tool
  9. Check the parking brake adjustment
  10. The adjustment is correct at 2 - 5 notches

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.