Timing chain replacement: Partner DV6ATED4/BTED4 engine - camshaft chain — PEUGEOT
Timing chain replacement — Partner DV6ATED4/BTED4 engine - camshaft chain on Peugeot: 38 steps. What to remove, in what order, and what to check after.
Workshop procedure for PEUGEOT — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 1.6, HDI, 16V
- Timing position: the crankshaft or camshaft is set and locked during this job
- Special tools named: locking pin, locking tool
📋 Procedure
- Camshaft bearing cap
- Refit the camshaft chain
- Valve cover
- Remove the injectors
- Remove the fuel filter with bracket
- Remove the vacuum pump
- Installation is in the reverse order of removal
- Camshaft gearwheel
- Remove the exhaust manifold heat shield
- Remove the timing belt
- Disconnect the camshaft position sensor electrical connector
- Remove the camshaft position sensor
- Remove the camshaft locking pin
- Lock the camshaft gearwheel
- Camshaft gearwheel locking tool:
- Remove the camshaft gearwheel bolt
- Remove the camshaft gearwheel
- Remove the timing cover bolts
- Remove the timing cover
- Remove the valve cover
- Remove the camshaft bearing caps
- Compress the timing chain tensioner rod
- Remove the camshaft chain
Other PEUGEOT procedures
- Peugeot 407 and EW10J4/EW7J4 timing belt replacement
- Peugeot 306 DW8/DW8B timing belt replacement
- 406 XUD9 turbo
- Peugeot EP6CDTX timing chain replacement
- 1007 - DV6TED4 - BE4R gearbox removal installation
- 207 - DV6C
- Peugeot 406_EW7J4 EW7J4 cylinder head removal & torque
- Peugeot 206, engines DV4C clutch replacement
- Peugeot 406, 607_EW12J4 EW12J4 cylinder head removal & torque
- Peugeot 3008 MCP ; 5008 MCP gearbox removal & installation
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.