Corsa D 1.3 diesel clutch — OPEL / VAUXHALL

🧭 Before you start

Fits: platform codes 1.3, CDTI

• Timing position: the crankshaft or camshaft is set and locked during this job
• Special tools named: locking tool
• Renewed: oil seals

Don't miss

• Always renew the concentric slave cylinder

🔧 Engine codes this applies to

📋 Procedure

Preparation and removal

1. Before disconnecting the battery cable, check the audio system security code
2. Check the clutch release bearing guide tube and fork; renew if necessary
3. Tighten the special tool
4. Apply tension to the clutch cover
5. Remove the clutch cover bolts

6. Remove the special tools
7. Flywheel locking tool:
8. Turn the special tool clockwise to release the clutch plate
9. Remove the clutch cover
10. Remove the clutch plate

Installation and checks

11. Fit the clutch cover
12. Note: Always renew the concentric slave cylinder
13. Clutch alignment tool:
14. Fit the clutch alignment tool
15. Apply tension to the clutch cover
16. Grease the thrust bearing inner bore, drive plate splines and release fork pivot points
17. Tighten the bolts in several stages, in a criss-cross pattern
18. Renew the oil seals if necessary
19. Remove the special tools
20. Refit the gearbox

Other OPEL / VAUXHALL procedures

• Corsa D (Z 13 DTE; A 13 DTE; A 13 DTC; A 13 DTR) - chain
• Meriva B 1.3; Corsa C Combo 1.3; Corsa D 1.3; Astra H 1.3, 1.9; Astra J 1.3 anc drive belt
• Astra J (1.3CDTi LSF) Clutch
• Opel A13DTC, Z13DTE, Renewal A13DTE DPF removal
• Opel Corsa C 1.2 CDTI timing chain replacement
• Opel Astra G 2.2 DTI Y22DTR timing chain replacement
• Opel VectraC, Signum 2.8 Z28NEL timing chain replacement
• Opel Astra G 2003 2.0 DTI Y20DTH timing chain replacement
• Opel Astra G X Y 20DTL 2.0 DTI X20DTL timing chain replacement
• Astra G F13/F13+/F17/F17+/F18 Gearbox