Pick Up D22 YD25DDTi — NISSAN
Pick Up D22 YD25DDTi on Nissan: 37 steps, engines YD25DDTI. What to remove, in what order, and what to check after.
Workshop procedure for NISSAN — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 2.5, DI
🔧 Engine codes this applies to
📋 Procedure
- Power steering:
- Tensioner pulley:
- Tighten the adjustment bolt
- Tighten the locking nut
- Ancillary drive belt:
- Power steering:
- Tensioner pulley:
- Tighten the locking nut
- Remove the ancillary drive belt
- Air-conditioning compressor belt:
- Loosen the locking nut
- Tighten the adjustment bolt
- Tighten the locking nut
Other NISSAN procedures
- Cabstar F24 YD25K3LD-5LO
- Nissan Micra K12 CR timing chain replacement
- Nissan non type specific 2.0 dCi timing chain replacement
- Nissan X-Trail T30 QR20, 25 QR20DE timing chain replacement
- Nissan X-Trail T31 2.4 QR25DE timing chain replacement
- Nissan Kubistar 1.5 dCi auxiliary belt replacement
- Nissan Qashqai 1.6 HR16DE timing chain replacement
- Nissan X-Trail T31 2.0 MR20DE timing chain replacement
- Almera Tino SR20DE
- Nissan Qashqai 1.5 dCi K9K timing belt replacement
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.