Almera QG18DE — NISSAN

🔧 Engine codes this applies to

📐 99 workshop diagrams for QG18DE

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

Preparation and removal

1. Loosen the power steering pump pulley bolts
2. Turn the adjustment bolt
3. Release the power steering pump belt
4. Remove the power steering belt
5. Loosen the idler pulley bolt

6. Tighten the idler pulley
7. Release the alternator V-belt
8. The tension is set if the tension gauge indicates a deflection of:
9. Vehicles with air conditioning:
10. Used belt:
11. New belt:
12. Vehicles without air conditioning:
13. Used belt:
14. New belt:

Installation and checks

15. Fit the power steering pump belt
16. Turn the adjustment bolt
17. Tension the belt
18. Tighten the bolt
19. Tighten the bolt
20. Apply a force of 98 Nm
21. The tension is set if the tension gauge indicates a deflection of:
22. Used belt:
23. New belt:

Other NISSAN procedures

• Nissan Micra K12 CR timing chain replacement
• Nissan non type specific 2.0 dCi timing chain replacement
• Nissan X-Trail T30 QR20, 25 QR20DE timing chain replacement
• Nissan X-Trail T31 2.4 QR25DE timing chain replacement
• Nissan Kubistar 1.5 dCi auxiliary belt replacement
• Nissan 2.0 D CD20 timing belt replacement
• Nissan 1.7 D CD17 timing belt replacement
• Nissan Serena 2.0 D LD20 timing belt replacement
• Nissan Serena 2.3 D LD23 timing belt replacement
• Nissan 2.0 TD CD20T timing belt replacement