Timing belt replacement: Nissan 2.0 TD (CD20T)

🧭 Before you start

Fits: platform codes 2.0, TD, |, 2.0DT

• Timing position: the crankshaft or camshaft is set and locked during this job

Don't miss

• Always check the timing marks before timing belt removal
• Never turn the engine in the direction opposite to that of normal operation

🔧 Engine codes this applies to

📐 14 workshop diagrams for CD20T

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

1. Always check the timing marks before timing belt removal
2. Unless otherwise advised by the manufacturer, the following procedures are recommended:
3. Tensioner:
4. Remove the timing belt upper cover
5. Remove the coolant pump pulley

6. Never turn the engine in the direction opposite to that of normal operation
7. Check the belt(s) for cracks, fraying, wear and oil contamination
8. Turn the engine 2 rotations clockwise
9. Remove the crankshaft pulley
10. Remove the timing belt lower cover
11. Check the timing marks again
12. Turn the tensioner anti-clockwise
13. Tighten the tensioner
14. Remove the camshaft cover
15. Remove the timing belt and crankshaft gearwheel

Other NISSAN procedures

• Nissan 2.0 TD CD20T timing belt replacement
• Nissan Micra K12 CR timing chain replacement
• Nissan non type specific 2.0 dCi timing chain replacement
• Nissan X-Trail T30 QR20, 25 QR20DE timing chain replacement
• Nissan X-Trail T31 2.4 QR25DE timing chain replacement
• Nissan Kubistar 1.5 dCi auxiliary belt replacement
• Nissan Kubistar 1.5 dCi timing belt replacement
• Nissan Kubistar 1.5 dCi timing belt replacement
• Nissan Note 1.4 CR14DE timing chain replacement
• Nissan Note 1.6 HR16DE timing chain replacement