Galant 4G63 '88 - '92 — MITSUBISHI

🧭 Before you start

Fits: platform codes 2.0, |, 2.0I, 4X4, 2.4

• Timing position: the crankshaft or camshaft is set and locked during this job

🔧 Engine codes this applies to

📐 64 workshop diagrams for 4G63

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

Preparation and removal

1. The tension is set at a deflection of:
2. Check the timing marks
3. Remove the alternator belt
4. Remove the coolant pump pulley
5. Disconnect the engine support (cylinder head)

6. Remove the crankshaft pulley
7. Note: Avoid bending, torsion or traction
8. Align the timing marks
9. Turn the tensioner backwards
10. Remove the timing belt
11. Remove the tensioner
12. Remove the timing belt

Installation and checks

13. Fit the tensioner pulley with bolt finger-tight
14. Tensioner:
15. Tighten the tensioner
16. Check the timing marks again
17. Check the timing marks

Other MITSUBISHI procedures

• Mitsubishi Galant 97-02 2.0 4G63 timing belt replacement
• Mitsubishi Galant '80 '87 2.0 4G63 timing belt replacement
• Mitsubishi Sapporo 1987 1990 4G63/4G64 timing belt replacement
• Mitsubishi 4G63 cylinder head removal & torque
• Mitsubishi Space Wagon "99 4G63/4G93 alternator removal
• Mitsubishi Outlander 2.0 Non-Turbo timing belt replacement
• Outlander 2.0 Turbo (4G63)
• Mitsubishi Colt 05 134.9XX 3 cyl 1.1 timing chain replacement
• Mitsubishi Colt 05 134.911 1.5 4G15 timing belt replacement
• Mitsubishi Pajero V60, V70 3.2 DI-D timing chain replacement