Timing belt replacement: Mazda MPV 96 2.5 TD (WL-TURBO)

🧭 Before you start

Fits: platform codes 2.5, TD, 12V

• Timing position: the crankshaft or camshaft is set and locked during this job

Don't miss

• Always check the timing marks before timing belt removal
• Never turn the engine in the direction opposite to that of normal operation
• The engine must be cold before timing belt adjustment

🔧 Engine codes this applies to

📋 Procedure

Preparation and removal

1. Always check the timing marks before timing belt removal
2. Never turn the engine in the direction opposite to that of normal operation
3. Disconnect the battery earth cable
4. Loosen the tensioner pulley bolt
5. Remove the timing belt front cover

6. Turn the crankshaft clockwise to align the timing marks
7. Remove the tensioner pulley
8. Remove the tensioner spring
9. Remove the timing belt

Installation and checks

10. Fit the timing belt
11. Check the tensioner and idler pulleys; renew if necessary
12. Check the belt(s) for cracks, fraying, wear and oil contamination
13. Note: The engine must be cold before timing belt adjustment
14. Note: Avoid bending, torsion or traction
15. Note: Repeat the procedure if the marks are outside the specified area
16. Tighten the tensioner pulley bolt
17. Turn the engine 2 rotations clockwise
18. Measure the timing belt deflection
19. The tension is set at a deflection of:
20. Repeat the procedure if required
21. Refit the air inlet hose
22. Refit the front timing belt cover
23. Reconnect the battery

Other MAZDA procedures

• Remove MPV GY cylinder head – Mazda GY
• Mazda 6, F3 timing chain replacement
• Mazda 6 Turbo 2.0 diesel timing belt replacement
• Mazda 3 2003 L3/LF timing chain replacement
• Mazda RF timing belt replacement
• Mazda 3 BK RF timing belt replacement
• Mazda 2_Demio 2007 ZJ/ZY timing chain replacement
• Mazda 6 2.2 2008 R2 timing chain replacement
• Mazda 6 2007 timing chain replacement
• Mazda Tribute 3.0 V6 DURATECAJ timing chain replacement