TorqFix

Thesis 2.4 belt check — LANCIA

Thesis 2.4 belt check on Lancia: 20 steps, engines 841D000, 841E000, 841P000. What to remove, in what order, and what to check after.

Workshop procedure for LANCIA — the exact step sequence and torque figures, straight from real workshop data.

20 steps 3 engine codes

🧭 Before you start

Fits: platform codes 2.0, 20V, TURBO, |, 2.4, JTD

  • Timing position: the crankshaft or camshaft is set and locked during this job
  • Special tools named: locking pin

🔧 Engine codes this applies to

841D000841E000841P000

📐 13 workshop diagrams for 841D000

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

Thesis 2.4 belt check — 841D000 · diagram 1
Thesis 2.4 belt check — 841D000 · diagram 2
Thesis 2.4 belt check — 841D000 · diagram 3
Thesis 2.4 belt check — 841D000 · diagram 4
Thesis 2.4 belt check — 841D000 · diagram 5
Thesis 2.4 belt check — 841D000 · diagram 6
Thesis 2.4 belt check — 841D000 · diagram 7
Thesis 2.4 belt check — 841D000 · diagram 8
+ 5 more diagrams
🔒 13 workshop diagrams for this job Ask about your Lancia 841D000 — free or sign up free to see the drawings

📋 Procedure

  1. Remove the front right wheel
  2. Remove the wheel arch cover lining
  3. Remove the engine covers
  4. Remove the resonator
  5. Remove the air filter and the air inlet hose
841D000? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Remove the engine support
  2. Support the gearbox with a trolley jack
  3. Remove the engine/gearbox supports
  4. Remove the jack
  5. Align the pinholes and fit the locking pin
  6. Loosen the tensioner pulley bolt
  7. Remove the drive belt
  8. Check the condition of the tensioner and idler pulley(s)
  9. Turn the tensioner pulley clockwise until the locking pin fits
  10. Use a special tool:
  11. Tighten the tensioner
  12. Remove the locking pin
  13. Turn the engine 2 rotations by hand
  14. Further refitting is in the reverse order of removal
Workshop diagrams

Ask TorqFix about your Lancia 841D000 — it answers with the exact sequence for that engine and the workshop drawing for each step. First question is free after a 20-second sign-up, no card.

Ask about your Lancia 841D000 — free → or sign up free to see the drawings

Other LANCIA procedures

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.