Timing belt replacement: Honda CIVIC SOHC 1.6 (D16Y2)
Step-by-step timing belt replacement for the Honda CIVIC SOHC 1.6 (D16Y2): 77 steps. What to remove, in what order, and what to check after.
Workshop procedure for HONDA — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 1.6I, SR
- Timing position: the crankshaft or camshaft is set and locked during this job
Don't miss
- Always check the timing marks before timing belt removal
- Never turn the engine in the direction opposite to that of normal operation
🔧 Engine codes this applies to
📋 Procedure
Preparation and removal
- Always check the timing marks before timing belt removal
- Never turn the engine in the direction opposite to that of normal operation
- Power steering pump:
- Check the crankshaft timing marks
- The engine rotates anti-clockwise
- Remove the power steering belt
- Tighten the tensioner
- Remove the bracket
- Note: Avoid bending, torsion or traction
- Turn the crankshaft anti-clockwise by 3 teeth on the camshaft gearwheel
- Remove the power steering fluid reservoir bracket
- Support the engine
- Crankshaft
- Remove the timing belt upper cover
- Remove the timing belt lower cover
- Loosen the tensioner 180°
- Move the tensioner to the slack position
Installation and checks
- Tighten the tensioner
- Fit the timing belt lower cover
- Check the timing marks again
- Refit the timing belt upper cover
- Refit the valve cover
- Tighten the alternator
- Fit the power steering pump bracket
- Refit the bracket
- Refit the air-conditioning drive belt
- Refit the air-conditioning drive belt idler pulley
- Refit the power steering pump
- Refit the power steering pump belt
- Refit the front left splash guard
- Reconnect the battery
Other HONDA procedures
- Honda Accord 2.0 K20A6/K20Z2 timing chain replacement
- Honda Accord 2.4 K24A3 timing chain replacement
- Honda Stream 2.0 K20A1 timing chain replacement
- Honda FRV 2.0 K20A9 timing chain replacement
- Honda CRV engines 2002> timing chain replacement
- PRELUDE SOHC B20A3, B20A4 1988
- Honda PRELUDE DOHC, 1993 2.3 H22A2 timing belt replacement
- Honda PRELUDE DOHC 1992 2.3 H23A2 alternator removal
- Honda HRV & 1.6 D16W1/D16W5 timing belt replacement
- Honda Stream 1.7 D17A2 alternator removal
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.