Cylinder head removal Punto 99- 1900 DS — FIAT

🧭 Before you start

Fits: platform codes 1.9, D

• Opens: coolant

🔧 Engine codes this applies to

📐 13 workshop diagrams for 188A3000

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

1. Disconnect the breather hose from the camshaft cover
2. Disconnect the EGR system
3. Refit all other parts in the reverse order of removal
4. Vehicles with air conditioning:
5. Drain the air-conditioning system

6. All vehicles:
7. Remove the front right wheel
8. Remove the cover in the wheel housing
9. Remove the ancillary drive belt
10. Remove the timing belt
11. Refit the right-hand engine support
12. Disconnect the glow plug connection cable
13. Disconnect the thermostat pipe
14. Disconnect the pipe from the inlet manifold
15. Disconnect the brake servo hose
16. Disconnect the exhaust pipe from the exhaust manifold
17. Remove the water pipe
18. Drain the cooling system
19. Disconnect the lower radiator hose
20. Remove the water pipe
21. Remove the exhaust manifold heat shield
22. Remove the EGR valve
23. Disconnect the expansion tank
24. Remove the bracket
25. Remove the water pipe
26. Remove the exhaust manifold
27. Disconnect the heater hoses
28. Remove the plate
29. Loosen the cylinder head bolts
30. Remove the cylinder head

Other FIAT procedures

• Doblo 2000 - 2010 1.2 8V / 1.9 D / 1.9 JTD 8V C510 / C513 gearbox
• Fiat 1.4 176A4000/176B6000 gearbox removal & installation
• Croma 2.2 Petrol Cylinder Head Removal
• Fiat Sedici 1.6 M16A timing chain replacement
• Fiat Punto Evo 1.4 Turbo MultiAir timing belt replacement
• Fiat Bravo 1.4 Turbo MultiAir 198A7000 timing belt replacement
• Doblo 2010 > 1.6 Multijet C510 gearbox
• Fiat 500L 1.3 Multijet 199B4000 timing chain replacement
• Fiat 500L 0.9Twin Turbo 199B6000 timing chain replacement
• Panda 0.9 Turbo