C4 Picasso EP6DT — CITROEN
C4 Picasso EP6DT on Citroen: 15 steps, engines EP6DT(5FT), EP6DT(5FX). What to remove, in what order, and what to check after.
Workshop procedure for CITROEN — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 1.6, THP, 140, |, 150
🔧 Engine codes this applies to
📐 20 workshop diagrams for EP6DT(5FT)
Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.
📋 Procedure
- Disconnect the battery
- The gear lever cannot be moved from position 'P'
- Remove the resonator
- Unclip the connector
- Remove the battery
- Remove the battery tray
- Remove the battery box support
- Disconnect the gear selector lever
- Push the gear-shift control cable release button
- Move as shown
- As far as the stop
- Back off the adjuster by 2 notches
- Gear lever in position 'N'
- The procedure is complete
Ask TorqFix about your Citroen EP6DT(5FT) — it answers with the exact sequence for that engine and the workshop drawing for each step. First question is free after a 20-second sign-up, no card.
Ask about your Citroen EP6DT(5FT) — free → or sign up free to see the drawingsOther CITROEN procedures
- Citroen Drive check auxiliary belt replacement
- Citroen direct injection EP6CDT/EP6DT timing chain replacement
- Citroen C4 MCM EP6DT gearbox removal & installation
- Citroen C4 Picasso MCP EP6CDT gearbox removal & installation
- Peugeot 3008, 5008 EP6CDT/EP6DT clutch replacement
- Citroen DW10TD timing belt replacement
- Citroen DW10TD timing belt replacement
- Citroen Xantia non turbo 1.9 HDi XUD9A timing belt replacement
- Citroen Xantia turbo timing belt replacement
- Citroen EW10J4/EW7J4 timing belt replacement
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.