Separating seat pan cover and padding - seat pan with seat depth adjustment — AUDI

🧭 Before you start

Fits: Audi A4 B8 (8K, 2007–2015)

• Renewed: upholstery clips

📋 Procedure

1. Remove cover and padding from seat pan and seat depth adjuster .
2. Unclip fastening strips (2) from fasteners (5).
3. Disengage cover from lugs (4) on both sides.
4. Detach mounting bracket (3) with padding for seat depth adjustment from cover (1).
5. Detach cover (1) as far as possible from padding (3).

6. Release fastening strip (4) from clips (2).
7. Detach cover from padding.
8. Unclip contour wire (3) (inserted in pouch (4) of cover (5)) from clips (2).
9. Detach cover from padding (1).
10. Use pliers (4) to pinch off upholstery clips (3).
11. Detach cover (1) from padding (2).
12. Detach cover (1) as far as possible from padding (3).
13. Release fastening strip (4) from clips (2).
14. Unclip contour wire (3) (inserted in pouch (4) of cover (5)) from clips (2).
15. Detach cover from padding (1).
16. Use pliers (4) to pinch off upholstery clips (3).
17. Detach cover (1) from padding (2).
18. On equipment version with leather seats, use upholstery clip pliersV.A.G 1634 to fit new upholstery clips.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing emergency battery for telematics A16 · 1 torque figures
• Removing and installing printed circuit with tiptronic switch F189
• Removing and installing driver's airbag unit with sports steering wheel · 1 torque figures
• Removing and installing sports steering wheel – Audi A2 · 1 torque figures
• Removing and installing fixed lightweight rear seat backrest